REVIEW: GRAVITAS ENTRY FOUNTAIN PEN

I've been lucky enough to be able to follow Ben Walsh quite closely on his journey to get the Gravitas brand off the ground. Chatting and exchanging ideas with him on the regular got me a glimpse of the creative mind behind the brand. Ever since starting Gravitas in 2020, one of Ben's goals was to create a more affordable fountain pen to stand alongside the self-titled 'Gravitas' fountain pen (reviewed HERE) that started the brand. A more accessible option into the Gravitas brand (and an entry point into fountain pens, in general), while still being able to live up to the highest quality standards. 

The Gravitas 'Entry' fountain pen is all those things - but it would be a mistake to call it an entry-level pen! Because that, it most certainly is not! Instead, the Entry manages to offer an incredible bang for the buck, a design that's easy on the eyes, and a lot of thoughtful design details I've come to expect from Ben's creations. 

In the looks department, the sleek and nimble Entry is quite a departure from the chunky, ultra-minimal, torpedo-shaped Gravitas FP. The looks of the Entry are a bit more easily digestible, and perhaps even more traditional, which will undoubtedly make it appeal to a wider audience. It has a flat top design with rather sharp pointed finials on both ends (not that you could cut yourself on it, but they sure are pointy!). The cap has a slightly bulbous shape and is relatively short in comparison to the long and gently tapered barrel. The elegant, streamlined shape gives it somewhat of a brush pen vibe. 

As for now, the Entry is available in a myriad of anodized colors on an aluminum basis. I chose the Olive grey colorway, which is a beautiful dark and muted green. If you want a bit more pop, look into the Gravitas signature 'Skittle' rainbow finish. The pen is bead blasted before being sent off to the anodizer, which creates a very smooth and satiny finish that I find very pleasant to the touch.

L to R: Karas Pen Co Ink, Namisu Nova, Ensso Piuma, Gravitas Gravitas FP, Gravitas Entry, Lamy 2000, Lamy Safari

The Entry appears smaller but isn't. With a closed length of 14.5 cm (5.71"), it isn't all that much shorter than the oversized Gravitas FP. Uncapped, the Entry retains most of its length (13.8 cm/ 5.43"). Especially the narrower section (down to 9.8 mm/ 0.39" at the thinnest part of the taper) may trick you into thinking you're holding a much smaller pen. So if you prefer slightly thinner pens, the Entry has a high chance of appealing to you. At 31 grams, the Entry strikes a good balance between being nimble, yet offering just enough heft to let you know you're holding a solid metal pen. 

The smooth and streamlined transition from section to barrel offers a comfortable grip

The skinny tapered barrel of the Entry doesn't allow for the cap to be posted. But a pen this size doesn't really need to be posted anyway if you ask me. The Entry scores very high marks in the comfort department, with its long and gently tapered shape, a long section that transitions smoothly into a set of shallow and non-sharp threads. There's also no step that could interfere with your grip.

The stainless steel section deserves some attention here, as it really ties the entire pen together. The black-PVD coating provides a sleek look that pairs well with this anodized 'Grey Olive' colorway. If you're not a fan of metal sections, don't write the Entry off just yet! The section shape is similar to that of the Gravitas FP, but of course narrower. It has a nice gentle taper towards the nib, before flaring out again to catch your grip.

Talking about grip, this metal section is far from slippery! If you look closer, you'll notice the machined line pattern that runs around the entire length of the section. The pattern is very fine and not aggressive on your fingers, yet does an excellent job providing grip. The more dense stainless steel section, in combination with the aluminum barrel, shifts the center of gravity towards the grip section, creating a pen that feels lightweight and balanced in the hand.

The original Gravitas FP prototype I reviewed a year ago, came with a steel Bock nib. But in the meantime, Ben switched entirely to JoWo nibs. Since many similar brands (such as Ensso or Namisu) stick to Bock, it's nice to see Gravitas provide some diversity on the market. Along with every pen, a small handwritten test paper is included, implying that every pen passes through a final QC before being shipped out. And indeed, I have only positive things to say about the writing experience! 

The medium steel nib on this particular pen wrote beautifully smooth and hassle-free out of the box. Even though in my experience, JoWo tends to offer rather consistent, properly set-up nibs, I still appreciate that Ben takes the time to check each one individually just to be sure. 

As mentioned at the beginning of this post, the Gravitas Entry comes in at a fairly accessible price point of 60€. For that money, you receive a sleek, solid metal pen with a stainless steel PVD-coated section, topped off by a hand-tested JoWo nib. Despite being a full-sized pen, its noticeably slimmer and more streamlined profile will undoubtedly appeal to those that find the Gravitas FP just too big. 

On the flipside, the rather slim profile of the Entry could also put some people off (it certainly took me some time to get used to!), though Ben also thought of that and designed the 'Gravitas Sentry': a slightly larger version of the Entry pen for those who prefer a more beefy pen, but with the same design cues as the Entry.

This product was sent to me by Gravitas so I could write this review. I was in no way influenced in the making of this review, the opinions shared in this review are completely my own! This post does not contain affilate links.

REVIEW: BEN WALSH DESIGN GRAVITAS FOUNTAIN PEN & GRAVITAS TWIST PEN

I started chatting with Irish designer Ben Walsh about a year ago when all this was still a concept idea and a bunch of renders. Ben - who got into the pen making industry with unique, handmade concrete pens - wanted to create a metal pen from scratch, and he was actively engaging with the community to gather feedback. One year, and a lot of exchanged thoughts and ideas later, Ben has released his pen - I should say 'pens - out in the wild via a Kickstarter campaign that took off last week: Gravitas pens!

Now, if you know me and my reviews, you'll know that I have a sliiiiight tendency to get overly excited about cool metal pens, but believe me when I say this is a Kickstarter you HAVE to check out if you're even the slightest bit interested in this type of pens! If you still don't believe me after this review - no offense taken - check out Anthony's review over at UK Fountain Pens. Anthony likes it too, and he's a tough guy to convince!

From afar, you might be forgiven for thinking of the Gravitas fountain pen and Gravitas 'Twist' capless rollerball as a 'been there, done that' design. True, nobody's reinventing the wheel here (not that anyone has done that in the pen industry for a very long time, I'd dare to say), but if anything the Gravitas pens are very good looking wheels! The Gravitas and Gravitas Twist pair up nicely side by side, but they are two relatively different pens in terms of design. 

Let's start with the Gravitas fountain pen (and capped rollerball), which has a very pronounced torpedo shape with a girthy, straight cylindrical body. It tapers down sharply towards the cap and barrel finials into pointed ends... but instead of a point, you'll find a small silicon nitride ball on either end! 

Despite a somewhat tactical pen vibe, the finials' main intent is to provide a more durable design that could survive a drop better than a bare aluminium finial would. Compared to the more rounded cigar-shaped Ensso Piuma or Namisu Horizon - two comparable pens - the Gravitas has a much more robust and bulky appearance (probably because it IS robust and bulky), which I quite enjoy. 

Yeah... too much is too much!

The clean, minimal design is interrupted by a threaded section on the back of the barrel. While I don't find the threads as visually distracting as I thought I would, I'm still happy to know that they will be dropped in the final production version. The Gravitas is more than long enough to be used without posting (in fact, it looks a bit silly with the cap on the back!) so you won't miss those threads at all. 

Streamlined!

The Twist pen is a different beast altogether. It's sleeker, skinnier, and has a long and rounded taper towards the narrow tip of the pen. What sets the Twist apart is its flat spot that prevents it from rolling around. With respect to the center of the pen, the flat is angled towards the front of the pen (my photo's don't do this justice at all). This gives the pen a mean-looking 'stance' when it sits on a flat surface, with the tip angled downward - it's quite cool. 

The twist mechanism of the Twist (the name certainly isn't far-fetched!) is of Schmidt make, the same as those found in Baron Fig's Squire. It has a pleasant action and feels quite solid (there's a slight rattle, but nothing too distracting). I do wish that the twist knob was a bit longer compared to the rest of the pen, to make it easier to reach and operate. Ben took note of this as well, when I and a couple other reviewers were asked to give input on these production prototypes, and so these changes will most likely end up in the final design. 

While the idea is to expand the Gravitas collection with various materials and finishes (including really neat laser-etched graphics that cover the entire pen!), the Kickstarter starts off with three clean-looking anodized aluminium finishes: black, silver and gold. Even on these 'prototypes' (quite advanced proto's, but still...), the finish is immaculate. The aluminium base pen is bead-blasted to remove machining marks, and then anodized to give a smooth matte finish that is very pleasant to the touch.

The Gravitas fountain pen...

And the Gravitas Twist pen

L to R: Baron Fig Squire, Karas Retrakt, Namisu Nova, Ensso Piuma, Gravitas fountain pen, Gravitas Twist pen, Lamy Safari, Lamy 2000

The Gravitas fountain pen is a fairly large pen, noticeably larger than most other metal pens from the likes of Ensso, Namisu, Karas... It measures 14.8 cm/ 5.81" capped, and 13.4 cm/ 5.28"  uncapped. The maximum diameter of 1.5 cm/ .59" runs along almost the entire length of the pen, which makes it look bulky and robust. Underneath the cap, you'll find a long, gently tapered section with a comfortable diameter (1.1 cm/ .43" even at the thinnest point) that flares out slightly towards the nib.

Shallow threads and an angled transition towards the barrel create a comfortable writing experience 

The threads are shallow and fine, rendering them barely noticeable in the hand. The threads are single start on this prototype, and take a hefty three full turns to cap and uncap. The final production pen will get more common triple start threads that need fewer turns. One of my favorite practical design elements on the Gravitas is how the step towards the barrel is angled to make the transition much more gentle in the hand. It's an elegant and simple design decision that makes all the difference in terms of comfort, and yet you barely ever see it on other pens. It's a larger pen, so even the all-aluminium construction still comes in at 39 grams. I guess you could say the Gravitas has a reassuring... gravitas to it (terrible pun, I know), it sits nicely balanced in the hand.

The Twist pen is a bit smaller than its capped companion, although in absolute terms it's still far from compact. At 14.1 cm/ 5.55" in length, and with a maximum diameter of 1.4 cm/ .55" it's a bit shorter than the fountain pen. Due to the more tapered shape of the Twist, it definitely appears smaller than it actually is. With a weight of 34 grams, it feels positively hefty in the hand, too.

In terms of comfort, both pens score high marks with me. The Gravitas fountain pen has a comfortable design, a lot of the small details, like the shape and size of the section, the subtle threads and angled transition towards the barrel, are the result of careful consideration on Ben's end, taking into account a lot of input he got from the community. The Twist actually has a unique angle (hah! got it?) in terms of comfort, with the flat spot providing a natural area to rest your thumb, index or middle finger (either way you rotate it, it sits comfortably in your hand). The stretched out, tapered design means you can hold it closer to the tip or further up, to get the grip diameter you prefer. 

The Gravitas Twist comes loaded with Schmidt's P8127 rollerball refill. While that's not a bad refill, I've recently switched towards gel-based refills for my non-fountain pen writing. Luckily, the P8127 is similarly sized to standard Parker G2 refills (not to be confused with Pilot's G2!), which gives plenty of choices to swap refills to a ballpoint or gel refill (I've been using the Monteverde Ceramic gel refill, which fits perfectly and works quite well, even though it's not quite as fine as I'd like)

The Gravitas fountain pen, on the other hand, warrants some explaining: While the prototype I have in my hand has a Bock nib - common for most metal pens you'll find on the market today - Ben made the switch to JoWo when he noticed the quality wasn't as consistent as he'd like with Bock. It's good to know that a strict QC is in place to ensure each nib functions as it should. As a lot of brands adopt stock JoWo and Bock nibs these days, individual QC is the way to provide that little extra that sets your brand apart. Ironically, the Broad Bock nib on this particular pen has been one of the smoothest, and wettest Bock nibs I've come across. But regardless, I think JoWo is the safer choice, and it's something different from what most other brands are doing!

The Ben Walsh Design Gravitas pens are the result of a million small little details and considerate design choices. It has taken quite a few years, but the culmination of Ben Walsh's effort has led to two great-looking AND functioning pens (technically three, also counting the capped rollerball) that I can wholeheartedly stand behind. Maybe because I've had a teeny tiny say in how they turned out, but probably because they are just fantastic pens - simple as that! If I sound enthusiastic about them, that's because I am. 

If you feel like supporting the Gravitas pens, you can check out the Kickstarter page until September 17th. The Gravitas Twist pen starts at 45€, and the capped Gravitas rollerball and fountain pen each start at 50€, which is very affordable. Even at future respective retail prices of 65 and 70 euros, I still think these are a killer deal. Enough blabbing already! I've already gone and put my money where my mouth is, and I think you should, too.

This product was sent to me by Ben Walsh Design so I could write this review. I was in no way influenced in the making of this review, the opinions shared in this review are completely my own! This post does not contain affilate links.